Inokodzera Pipes od φ180-φ2032mm
Kushanda kunomanikidza kusvika 30bar.
The advantage of GRIP-D repair clamps is that is can befitted to existing pipes in situation, without any need to remove and replacing pipes, GRIP-R pipe repair clamp can repair the pipes that are ageing and corrosive and pipe wall has holes or cracks . When installing it, it only needs pipe clamp to wrap the leakage part and tighten the bolt. Then the installation is finished ideally and reliably.
Kunze kweDhivha yeGrip-D Double Lock Pipe Kugadzirisa Clamp kubva 180 kusvika 2032mm.
| Pombi kunze kwedhivha | Upamhi | Torque chiyero | ||||||||||
| Od |  |  | Φ D | B | C | Pasina Strip Insert | ne strip isa (max) | |||||
| (Mm) | (Mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (NM) | M | |||
| 180 | 7.087 | 16 | 30 | 204 | 142 | 250 | 75 | 40 | 60 | |||
| 200 | 7.874 | 16 | 30 | 224 | 142 | 250 | 75 | 40 | 60 | |||
| 219.1 | 16 | 30 | 251.1 | 142 | 250 | 75 | 40 | 60 | ||||
| 250 | 16 | 25 | 282 | 142 | 250 | 75 | 40 | 80 | ||||
| 267 | 10.512 | 264-270 | 16 | 25 | 299 | 142 | 250 | 75 | 40 | 80 | ||
| 273 | 270-276 | 16 | 25 | 305 | 142 | 250 | 75 | 40 | 80 | |||
| 304 | 11.969 | 10 | 20 | 336 | 142 | 250 | 75 | 40 | 80 | |||
| 10 | 20 | 142 | 250 | 75 | 40 | 80 | ||||||
| 14.000 | 352-359 | 8.5 | 16 | 387.6 | 142 | 250 | 75 | 40 | 80 | |||
| 377 | 375-379 | 8.5 | 16 | 409 | 142 | 250 | 75 | 40 | 80 | |||
| 406.4 | 7.5 | 16 | 438 | 142 | 250 | 75 | 40 | 80 | ||||
| 457.2 | 6.5 | 12 | 489 | 142 | 250 | 75 | 40 | 80 | ||||
| 508 | 20.000 | 503-53 | 6 | 10 | 540 | 142 | 250 | 75 | 40 | 120 | M16 × 2 | |
| 22.000 | 554-564 | 5.5 | 10 | 590.8 | 142 | 250 | 75 | 40 | 160 | |||
| 24.000 | 605-615 | 5 | 10 | 142 | 250 | 75 | 40 | 160 | ||||
| 711.2 | 28.000 | 708-715 | 4 | 5 | 142 | 250 | 75 | 40 | 160 | |||
| 762 | 758-766 | 4 | 5 | 794 | 142 | 250 | 75 | 40 | 160 | |||
| 32.000 | 809-817 | 4 | 5 | 142 | 250 | 75 | 40 | 160 | ||||
| 4 | 5 | 142 | 250 | 75 | 40 | 160 | ||||||
| 1016 | 40.000 | 4 | 5 | 1048 | 142 | 250 | 75 | 40 | 200 | |||
| 3.5 | 5 | 1149.6 | 142 | 250 | 75 | 40 | 200 | |||||
| 3.5 | 5 | 142 | 250 | 75 | 40 | 200 | ||||||
| 3 | 5 | 1352.8 | 142 | 250 | 75 | 40 | 240 | |||||
| 56.000 | 3 | 5 | 142 | 250 | 75 | 40 | 240 | |||||
| 2,5 | 5 | 1556 | 142 | 250 | 75 | 40 | 240 | |||||
| 2,5 | 5 | 142 | 250 | 75 | 40 | 240 | ||||||
| 1722-1732 | 2,5 | 5 | 1759.2 | 142 | 250 | 75 | 40 | 240 | ||||
| 1824-1834 | 2 | 5 | 142 | 250 | 75 | 40 | 240 | |||||
| 1930.4 | 76.000 | 1925-1935 | 2 | 5 | 142 | 250 | 75 | 40 | 240 | |||
| 2032 | 2 | 5 | 142 | 250 | 75 | 40 | 240 | |||||
| V1 | V2 | V3 | V4 | V5 | V6 | |
| Aisi 304 | Aisi 316L | Aisi 316L | Aisi 316ti | Aisi 304 | ||
| Bolts | Aisi 304 | Aisi 316L | Aisi 304 | Aisi 304 | Aisi 4135 | |
| Aisi 304 | Aisi 316L | Aisi 304 | Aisi 304 | Aisi 4135 | ||
| Aisi 301 | Aisi 301 | Aisi 301 | Aisi 301 | Aisi 301 |
| Tembiricha | ||
| FPM / FKM |